We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Device Spare Component Tungsten Carbide Winder for Winding EPT Wire Xihu (We EPT Lake) Dis. Nozzle

Item description

Coil winding wire guide Nozzles(TungstenCarbide nozzle)also phone wire guidebook tubes, wire information eyelets, wire information needles.

 

it is employed on coil winding machine. It is made precisely of challenging alloy and enjoys the hardness up to HRA90.

 

Two termina EPT and innerle are all obtain mirror surface treatment to ensure enameled wire helps make no scrape. Large hardness, resistance to flexure, block and effect. 

Solution Characteristics:

1. Large Dress in Resistance
This is certain by the choice of materia EPT for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of circumstance hardened steel. Human body content is stainless metal for structural supports, not put on-bearing.

2. Scratch-Proofing
Remove wire insulation film damage, lower friction resistance, secure wire stress. The wire-guiding surfaces are mirror concluded by diamond lapping to a surface area roughness of 2 -4 micro inches Ra or greater, materials permit.

three. Straightness and Stiffness
Straightness and Stiffness are described by the wire exit currently being concentric and rigid with regard to the nozzle finding? . In basic conditions, the wire need to exit from the nozzle concentric to the finding? To within .02 mm, with or with no load. A geometric characteristic presentation is demonstrated at higher remaining. Concentricity to inside of .01mm.

four. Precise Exit Radii
Simply because the coil winding nozzle’s Exit Radii governs the angle of the wire exit from a single coil to the subsequent, it must be monitored to + / – .571 mm. This is carried out by electronic measurement, proven at upper appropriate.

Prodict Specification:
Measurements:
Customize offered by requested, exterior diameter is ruled by nozzle wall thickness. See the measurements drawing to affirm your nozzles measurements in accordance to your winding machine and coil items.

Processing limit: D1≥ .2mm, D1≥ .7mm

NO	Design	L	L1	D	D1	d	d1	H
1	W5710-.8-0602	20	two	.eight	.6	.two	.2
two	W571-1.5-1007	thirty	seven	one.five	one	.five	.5
three	W571-2-1007	30	seven	2	1	.5	.5
4	W571-2-1210	35	10	2	one.2	.five	.5
5	W571-2-1007	35	7	2	one	.four	.4
six	W0330-2-0808	30	eight	2	.eight	.three	.three
8	W0326-2-1007	26	7	two	one	.three	.3
nine	W571-2-1571	thirty	10	2	1	.5	.5
eleven	W835-2.5-2011	35	eleven	2.5	2	.eight	.8
12	W0330-2-1006	30	6	two	1	.3	.3
13	W 0571 -2-1215	35	fifteen	two	one.two	.6	.six
fifteen	W571-3-1571	30	ten	3	one	.five	.5
sixteen	W0630-3-1008	thirty	8	3	1	.6	.six
17	W03303-0807	thirty	7	3	.8	.three	.3
19	W0630-3-1309	thirty	nine	3	one.3	.six	.six
21	W0614-3-1509p	14	9	three	1.5	.six	.six	5
22	W1014-3-1509p	fourteen	nine	3	1.5	one	1	5
23	W571-3-1009p	fourteen	nine	three	1	.4	.four	five
24	W1030-three	thirty		three		1	1
25	W0326-3-0808	26	8	three	.eight	.three	.3
29	W0626-3-1208	26	8	three	one.2	.6	.six
thirty	W1030-3-2014	thirty	14	3	2	twelve	twelve
31	W1230-3-2514	30	fourteen	three	2.five	1.2	one.two
33	W0330-3-0502	30	2	3	.five	.3	.three
34	W0626-3-1208	26	eight	3	one.two	.6	.6
36	W0330-3-0504	30	four	3	.5	.three	.three
37	W0823-three	25		3		.eight	.8
38	W571-1211	35	eleven	3	1.2	.four	.four
39	W5715-3-0811	35	eleven	3	.8	.35	.35
forty one	W1571-3-1608	twenty five	8	3	1.six	1	1
forty two	W0845-3-2017	forty five	17	three	2	.8	.eight
43	W1535-three	35		three		1.5	one.5
forty four	W1036-3-2016	36	sixteen	three	two	one	one
forty five	W0630-3-1212	30	twelve	3	one.2	.6	.six
46	W 0571 -4-2015	thirty	fifteen	four	2	.eight	.eight
47	W1243-4-2515p	forty three	fifteen	4	2.5	1.2	1.2	twenty
forty eight	W0843-4-2015p	32	fifteen	4	2	.eight	.8	20
forty nine	W1232-4.five	forty three		four.5		1.two	one.2
50	W1543-4-2512p	forty three	twelve	four	two.five	one.5	1.five	20
fifty one	W0843-3.9-2019p	twenty	19	3.9	two	.eight	.eight	19
fifty two	W2571-five	20		five		2	two

Exhibit of Item

 

Information of our company

HAR EPT Engineering Sector Co., Ltd , found in 2001, is located in the beautiful city of China’s manufacturing sector HangZhou Town.  It is committed to nozzle, ruby goods, tungsten carbide merchandise, ceramic products, plastic crochet hook and precision equipment production .Our primary products are nozzle, ceramic roller, jump wire preventer, numerous sizes of ceramic eyes, combination  wire roller, ceramic wheel and non-standard parts, all sorts of rigidity and so on. 

 

FAQ

one. How can I get a quotation?

You can discover our speak to data below this website page and some depth information will be extremely helpful to get an precise quotation. We will give quotation in 24hours, if urgent, you should tell us and we will regard your inquiry precedence.
 
2. How can I get a sample?
 
As the price confirmed, you can require for samples. 
 
3. Can you do the design for us?
 
 Yes, we have our manufacturing facility and we can make EPT get.
 
 
four. How long can I expect to get the sample?
 
Normally it normally takes 7-15days to produce the sample.
 
 
5. What about the lead time for mass production?
 
It is dependent on what kind of items you ordered. Generally, fifteen-25days for mass purchase.
 
We sincerely hope to get your inquiry of this voice coil actuator! If any queries, remember to feel totally free to make contact with us.  Many thanks for checking out our web site!O(∩_∩)O

 

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic tools manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the detailed replacement elements contained herein are not sponsored, accredited, or made by the OEM.