We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Device Spare Component Tungsten Carbide Winder for Winding EPT Wire Xihu (We EPT Lake) Dis. Nozzle
Item description
Coil winding wire guide Nozzles(TungstenCarbide nozzle)also phone wire guidebook tubes, wire information eyelets, wire information needles.
it is employed on coil winding machine. It is made precisely of challenging alloy and enjoys the hardness up to HRA90.
Two termina EPT and innerle are all obtain mirror surface treatment to ensure enameled wire helps make no scrape. Large hardness, resistance to flexure, block and effect.
Solution Characteristics:
1. Large Dress in Resistance
This is certain by the choice of materia EPT for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of circumstance hardened steel. Human body content is stainless metal for structural supports, not put on-bearing.
2. Scratch-Proofing
Remove wire insulation film damage, lower friction resistance, secure wire stress. The wire-guiding surfaces are mirror concluded by diamond lapping to a surface area roughness of 2 -4 micro inches Ra or greater, materials permit.
three. Straightness and Stiffness
Straightness and Stiffness are described by the wire exit currently being concentric and rigid with regard to the nozzle finding? . In basic conditions, the wire need to exit from the nozzle concentric to the finding? To within .02 mm, with or with no load. A geometric characteristic presentation is demonstrated at higher remaining. Concentricity to inside of .01mm.
four. Precise Exit Radii
Simply because the coil winding nozzle’s Exit Radii governs the angle of the wire exit from a single coil to the subsequent, it must be monitored to + / – .571 mm. This is carried out by electronic measurement, proven at upper appropriate.
Prodict Specification:
Measurements:
Customize offered by requested, exterior diameter is ruled by nozzle wall thickness. See the measurements drawing to affirm your nozzles measurements in accordance to your winding machine and coil items.
Processing limit: D1≥ .2mm, D1≥ .7mm
NO | Design | L | L1 | D | D1 | d | d1 | H |
1 | W5710-.8-0602 | 20 | two | .eight | .6 | .two | .2 | |
two | W571-1.5-1007 | thirty | seven | one.five | one | .five | .5 | |
three | W571-2-1007 | 30 | seven | 2 | 1 | .5 | .5 | |
4 | W571-2-1210 | 35 | 10 | 2 | one.2 | .five | .5 | |
5 | W571-2-1007 | 35 | 7 | 2 | one | .four | .4 | |
six | W0330-2-0808 | 30 | eight | 2 | .eight | .three | .three | |
8 | W0326-2-1007 | 26 | 7 | two | one | .three | .3 | |
nine | W571-2-1571 | thirty | 10 | 2 | 1 | .5 | .5 | |
eleven | W835-2.5-2011 | 35 | eleven | 2.5 | 2 | .eight | .8 | |
12 | W0330-2-1006 | 30 | 6 | two | 1 | .3 | .3 | |
13 | W 0571 -2-1215 | 35 | fifteen | two | one.two | .6 | .six | |
fifteen | W571-3-1571 | 30 | ten | 3 | one | .five | .5 | |
sixteen | W0630-3-1008 | thirty | 8 | 3 | 1 | .6 | .six | |
17 | W03303-0807 | thirty | 7 | 3 | .8 | .three | .3 | |
19 | W0630-3-1309 | thirty | nine | 3 | one.3 | .six | .six | |
21 | W0614-3-1509p | 14 | 9 | three | 1.5 | .six | .six | 5 |
22 | W1014-3-1509p | fourteen | nine | 3 | 1.5 | one | 1 | 5 |
23 | W571-3-1009p | fourteen | nine | three | 1 | .4 | .four | five |
24 | W1030-three | thirty | three | 1 | 1 | |||
25 | W0326-3-0808 | 26 | 8 | three | .eight | .three | .3 | |
29 | W0626-3-1208 | 26 | 8 | three | one.2 | .6 | .six | |
thirty | W1030-3-2014 | thirty | 14 | 3 | 2 | twelve | twelve | |
31 | W1230-3-2514 | 30 | fourteen | three | 2.five | 1.2 | one.two | |
33 | W0330-3-0502 | 30 | 2 | 3 | .five | .3 | .three | |
34 | W0626-3-1208 | 26 | eight | 3 | one.two | .6 | .6 | |
36 | W0330-3-0504 | 30 | four | 3 | .5 | .three | .three | |
37 | W0823-three | 25 | 3 | .eight | .8 | |||
38 | W571-1211 | 35 | eleven | 3 | 1.2 | .four | .four | |
39 | W5715-3-0811 | 35 | eleven | 3 | .8 | .35 | .35 | |
forty one | W1571-3-1608 | twenty five | 8 | 3 | 1.six | 1 | 1 | |
forty two | W0845-3-2017 | forty five | 17 | three | 2 | .8 | .eight | |
43 | W1535-three | 35 | three | 1.5 | one.5 | |||
forty four | W1036-3-2016 | 36 | sixteen | three | two | one | one | |
forty five | W0630-3-1212 | 30 | twelve | 3 | one.2 | .6 | .six | |
46 | W 0571 -4-2015 | thirty | fifteen | four | 2 | .eight | .eight | |
47 | W1243-4-2515p | forty three | fifteen | 4 | 2.5 | 1.2 | 1.2 | twenty |
forty eight | W0843-4-2015p | 32 | fifteen | 4 | 2 | .eight | .8 | 20 |
forty nine | W1232-4.five | forty three | four.5 | 1.two | one.2 | |||
50 | W1543-4-2512p | forty three | twelve | four | two.five | one.5 | 1.five | 20 |
fifty one | W0843-3.9-2019p | twenty | 19 | 3.9 | two | .eight | .eight | 19 |
fifty two | W2571-five | 20 | five | 2 | two |
Exhibit of Item
Information of our company
HAR EPT Engineering Sector Co., Ltd , found in 2001, is located in the beautiful city of China’s manufacturing sector HangZhou Town. It is committed to nozzle, ruby goods, tungsten carbide merchandise, ceramic products, plastic crochet hook and precision equipment production .Our primary products are nozzle, ceramic roller, jump wire preventer, numerous sizes of ceramic eyes, combination wire roller, ceramic wheel and non-standard parts, all sorts of rigidity and so on.
FAQ
one. How can I get a quotation?
You can discover our speak to data below this website page and some depth information will be extremely helpful to get an precise quotation. We will give quotation in 24hours, if urgent, you should tell us and we will regard your inquiry precedence.
2. How can I get a sample?
As the price confirmed, you can require for samples.
3. Can you do the design for us?
Yes, we have our manufacturing facility and we can make EPT get.
four. How long can I expect to get the sample?
Normally it normally takes 7-15days to produce the sample.
5. What about the lead time for mass production?
It is dependent on what kind of items you ordered. Generally, fifteen-25days for mass purchase.
We sincerely hope to get your inquiry of this voice coil actuator! If any queries, remember to feel totally free to make contact with us. Many thanks for checking out our web site!O(∩_∩)O
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic tools manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the detailed replacement elements contained herein are not sponsored, accredited, or made by the OEM.