Tag Archives: machine machinery

Machine near me made in China – replacement parts – in Eskisehir Turkey Spare Part Tungsten Carbide Winder for Winding Machinery Wire Guide Nozzle with top quality

Machine  near me  made in China - replacement parts -  in Eskisehir Turkey  Spare Part Tungsten Carbide Winder for Winding Machinery Wire Guide Nozzle with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Device Spare Component Tungsten Carbide Winder for Winding EPT Wire Xihu (We EPT Lake) Dis. Nozzle

Item description

Coil winding wire guide Nozzles(TungstenCarbide nozzle)also phone wire guidebook tubes, wire information eyelets, wire information needles.

 

it is employed on coil winding machine. It is made precisely of challenging alloy and enjoys the hardness up to HRA90.

 

Two termina EPT and innerle are all obtain mirror surface treatment to ensure enameled wire helps make no scrape. Large hardness, resistance to flexure, block and effect. 

Solution Characteristics:

1. Large Dress in Resistance
This is certain by the choice of materia EPT for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of circumstance hardened steel. Human body content is stainless metal for structural supports, not put on-bearing.

2. Scratch-Proofing
Remove wire insulation film damage, lower friction resistance, secure wire stress. The wire-guiding surfaces are mirror concluded by diamond lapping to a surface area roughness of 2 -4 micro inches Ra or greater, materials permit.

three. Straightness and Stiffness
Straightness and Stiffness are described by the wire exit currently being concentric and rigid with regard to the nozzle finding? . In basic conditions, the wire need to exit from the nozzle concentric to the finding? To within .02 mm, with or with no load. A geometric characteristic presentation is demonstrated at higher remaining. Concentricity to inside of .01mm.

four. Precise Exit Radii
Simply because the coil winding nozzle’s Exit Radii governs the angle of the wire exit from a single coil to the subsequent, it must be monitored to + / – .571 mm. This is carried out by electronic measurement, proven at upper appropriate.

Prodict Specification:
Measurements:
Customize offered by requested, exterior diameter is ruled by nozzle wall thickness. See the measurements drawing to affirm your nozzles measurements in accordance to your winding machine and coil items.

Processing limit: D1≥ .2mm, D1≥ .7mm

NO Design L L1 D D1 d d1 H
1 W5710-.8-0602 20 two .eight .6 .two .2  
two W571-1.5-1007 thirty seven one.five one .five .5  
three W571-2-1007 30 seven 2 1 .5 .5  
4 W571-2-1210 35 10 2 one.2 .five .5  
5 W571-2-1007 35 7 2 one .four .4  
six W0330-2-0808 30 eight 2 .eight .three .three  
8 W0326-2-1007 26 7 two one .three .3  
nine W571-2-1571 thirty 10 2 1 .5 .5  
eleven W835-2.5-2011 35 eleven 2.5 2 .eight .8  
12 W0330-2-1006 30 6 two 1 .3 .3  
13 W 0571 -2-1215 35 fifteen two one.two .6 .six  
fifteen W571-3-1571 30 ten 3 one .five .5  
sixteen W0630-3-1008 thirty 8 3 1 .6 .six  
17 W03303-0807 thirty 7 3 .8 .three .3  
19 W0630-3-1309 thirty nine 3 one.3 .six .six  
21 W0614-3-1509p 14 9 three 1.5 .six .six 5
22 W1014-3-1509p fourteen nine 3 1.5 one 1 5
23 W571-3-1009p fourteen nine three 1 .4 .four five
24 W1030-three thirty   three   1 1  
25 W0326-3-0808 26 8 three .eight .three .3  
29 W0626-3-1208 26 8 three one.2 .6 .six  
thirty W1030-3-2014 thirty 14 3 2 twelve twelve  
31 W1230-3-2514 30 fourteen three 2.five 1.2 one.two  
33 W0330-3-0502 30 2 3 .five .3 .three  
34 W0626-3-1208 26 eight 3 one.two .6 .6  
36 W0330-3-0504 30 four 3 .5 .three .three  
37 W0823-three 25   3   .eight .8  
38 W571-1211 35 eleven 3 1.2 .four .four  
39 W5715-3-0811 35 eleven 3 .8 .35 .35  
forty one W1571-3-1608 twenty five 8 3 1.six 1 1  
forty two W0845-3-2017 forty five 17 three 2 .8 .eight  
43 W1535-three 35   three   1.5 one.5  
forty four W1036-3-2016 36 sixteen three two one one  
forty five W0630-3-1212 30 twelve 3 one.2 .6 .six  
46 W 0571 -4-2015 thirty fifteen four 2 .eight .eight  
47 W1243-4-2515p forty three fifteen 4 2.5 1.2 1.2 twenty
forty eight W0843-4-2015p 32 fifteen 4 2 .eight .8 20
forty nine W1232-4.five forty three   four.5   1.two one.2  
50 W1543-4-2512p forty three twelve four two.five one.5 1.five 20
fifty one W0843-3.9-2019p twenty 19 3.9 two .eight .eight 19
fifty two W2571-five 20   five   2 two  

Exhibit of Item

 

Information of our company

HAR EPT Engineering Sector Co., Ltd , found in 2001, is located in the beautiful city of China’s manufacturing sector HangZhou Town.  It is committed to nozzle, ruby goods, tungsten carbide merchandise, ceramic products, plastic crochet hook and precision equipment production .Our primary products are nozzle, ceramic roller, jump wire preventer, numerous sizes of ceramic eyes, combination  wire roller, ceramic wheel and non-standard parts, all sorts of rigidity and so on. 

 

FAQ

one. How can I get a quotation?

You can discover our speak to data below this website page and some depth information will be extremely helpful to get an precise quotation. We will give quotation in 24hours, if urgent, you should tell us and we will regard your inquiry precedence.
 
2. How can I get a sample?

 
As the price confirmed, you can require for samples. 
 
3. Can you do the design for us?
 

 Yes, we have our manufacturing facility and we can make EPT get.
 
 
four. How long can I expect to get the sample?

 
Normally it normally takes 7-15days to produce the sample.
 
 
5. What about the lead time for mass production?
 

It is dependent on what kind of items you ordered. Generally, fifteen-25days for mass purchase.
 
We sincerely hope to get your inquiry of this voice coil actuator! If any queries, remember to feel totally free to make contact with us.  Many thanks for checking out our web site!O(∩_∩)O

 

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic tools manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the detailed replacement elements contained herein are not sponsored, accredited, or made by the OEM.

Machine  near me  made in China - replacement parts -  in Eskisehir Turkey  Spare Part Tungsten Carbide Winder for Winding Machinery Wire Guide Nozzle with top quality

Machine  near me  made in China - replacement parts -  in Eskisehir Turkey  Spare Part Tungsten Carbide Winder for Winding Machinery Wire Guide Nozzle with top quality